Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency, 3-6 month monitoring and 6-12 month monitoring competencies for this competency to be accepted

• Fourth upload of evidence (12 month monitoring event)
• For the fourth upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 12 month log if (on page 3) the tick box for PO2-TOA 'Next monitoring due in 12 months' is ticked. Expiry Date is to be set at no more than 24 months from the expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 24 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency, 3-6 month monitoring and 6-12 month monitoring competencies for this competency to be accepted

• Fourth upload of evidence (12 month monitoring event)
• For the fourth upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 12 month log if (on page 3) the tick box for PO2-TWA 'Next monitoring due in 12 months' is ticked. Expiry Date is to be set at no more than 24 months from the expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO2 Track Work Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Work Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 24 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The PO2 TWA Trainer qualification specifically covers Queensland Rail's training delivery requirements
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency and 3-6, 6-12 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO2 Track Work Authority
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2 Track Work Authority and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• NOTE: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 24 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency, 3-6 month monitoring and 6-12 month monitoring competencies for this competency to be accepted

• Fourth upload of evidence (12 month monitoring event)
• For the fourth upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 12 month log if (on page 3) the tick box for RCPO 'Next monitoring due in 12 months' is ticked. Expiry Date is to be set at no more than 24 months from the expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification Rail Corridor Protection Officer (RCPO)
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for Rail Corridor Protection Officer (RCPO) and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 24 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency, 3-6, 6-12 and 12 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification Rail Corridor Protection Officer (RCPO)
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for Rail Corridor Protection Officer (RCPO) and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 24 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification Rail Corridor Protection Officer (RCPO)
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for Rail Corridor Protection Officer (RCPO) and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO Protection Officer
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO Protection Officer and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• The stages include - Initial uitilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage                        

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement 
• NOTE: The QR – Protection Officer Certificate of Achievement is to be used as the initial utilisation document
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

• No example provided.

Competency requirements

• The PO1 Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO1 Protection Officer
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO1 Protection Officer and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes- Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The PO2 TOA Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:- Protection Officer Name- Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority- Please note that in Section 2 not all boxes need to be ticked- Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date- Confirm supervisor name has signed, dated and ticked yes- Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold competency 0-3 utilisation for this competency to be accepted. Second upload of evidence (3 month monitoring event)

• For the second upload against this qualification, the first QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 3 month log if (on page 3) the tick box for PO1 'Next monitoring due in 6 months' is ticked. Expiry Date is to be set at no more than 6 months from expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO1 Protection Officer
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO1 Protection Officer and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: The QR - Protection Officer Level 1 Certificate of Achievement is to be used as the initial utilisation document
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The PO2 TWA Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold competency 0-3 utilisation for this competency to be accepted. Second upload of evidence (3 month monitoring event)

• For the second upload against this qualification, the first QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 3 month log if (on page 3) the tick box for PO2-TOA 'Next monitoring due in 6 months' is ticked. 
• Expiry Date is to be set at no more than 6 months from expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name- Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: The QR - PO2 Track Occupancy Authority Certificate of Achievement is to be used as the initial utilisation document

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold competency 0-3 utilisation for this competency to be accepted. Second upload of evidence (3 month monitoring event)

• For the second upload against this qualification, the first QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 3 month log if (on page 3) the tick box for PO2-TWA 'Next monitoring due in 6 months' is ticked. 
• Expiry Date is to be set at no more than 6 months from expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name- Card No. and Valid until date shown for the qualification PO2 Track Work Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Work Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: The QR - PO2 Track Work Authority Certificate of Achievement is to be used as the initial utilisation document

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold competency 0-3 utilisation for this competency to be accepted. Second upload of evidence (3 month monitoring event)

• For the second upload against this qualification, the first QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 3 month log if (on page 3) the tick box for RCPO 'Next monitoring due in 6 months' is ticked. Expiry Date is to be set at no more than 6 months from expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification Rail Corridor Protection Officer (RCPO) 
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome forRCPO Rail Corridor Protection Officer and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: The QR - Rail Corridor Protection Officer (RCPO) Certificate of Achievement is to be used as the initial utilisation document

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 6 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO Protection Officer
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO Protection Officer and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage                         

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement 
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Accepted evidence 

• No example provided.

Competency requirements

• The PO1 Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification DN1 trainer
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for DN1 trainer and set expiry date
  • Confirm supervisor Name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The PO2 TOA Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted

• Third upload of evidence (6 month monitoring event)
• For the third upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 6 month log if (on page 3) the tick box for PO1 'Next monitoring due in 12 months' is ticked.
• Expiry Date is to be set at no more than 12 months from the expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO1 Protection Officer 
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO1 Protection Officer and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The PO2 TWA Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO2 Track Work Authority
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2 Track Work Authority and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted

• Third upload of evidence (6 month monitoring event)
• For the third upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 6 month log if (on page 3) the tick box for RCPO 'Next monitoring due in 12 months' is ticked.
• Expiry Date is to be set at no more than 12 months from the expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification Rail Corridor Protection Officer (RCPO)
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for Rail Corridor Protection Officer (RCPO) and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification Rail Corridor Protection Officer (RCPO)
  • Please note that in Section 2 not all boxes need to be ticked- Identify monitoring outcome for Rail Corridor Protection Officer (RCPO) and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted

• Third upload of evidence (6 month monitoring event)
• For the third upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 6 month log if (on page 3) the tick box for PO2-TOA 'Next monitoring due in 12 months' is ticked.
• Expiry Date is to be set at no more than 12 months from the expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency and 3-6 month monitoring competencies for this competency to be accepted

• Third upload of evidence (6 month monitoring event)
• For the third upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 6 month log if (on page 3) the tick box for PO2-TWA 'Next monitoring due in 12 months' is ticked.
• Expiry Date is to be set at no more than 12 months from the expiry date of certificate of achievement

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO2 Track Work Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Work Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to 12 months from the Date of Completion on Certificate of Achievement

• No example provided.

Competency requirements

• The Monitoring Checklist is Queensland Rail internal document used to monitor continuous competency of people with this role
• The Monitoring Checklist accepted for Clipping Points, is the same as the Monitoring Checklist used for Protection Officer. The checklist will indicate if Clipping Points has been monitored
• First time applied:
  • QR - Certificate of Achievement In Field Protection - accepted from 10/10/2019
  • 3.8_CoA_CERT - accepted from 10/10/2019
  • 3.8_CoA_Accell - accepted from 18/10/2019
  • 3.8_CoA_Swetha - accepted from 10/10/2019
• QR Protection Officer Monitoring - Accepted

Upload requirements

• Issue date = date of completion on Certificate of Achievement
• Expiry date =
  • Set to 12 months from the Date of completion on Certificate of Achievement (when applied first time and then...)
  • Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events. 
• NOTE: if the completion of any monitoring event fass outside of the expiry date of the previous event, the evidence is to be rejected and the person advised to seek advice from railsafetyworker@qr.com.au

• No example provided.

Competency requirements

• The Monitoring Checklist is Queensland Rail internal document used to monitor continuous competency of people with this role
• The Monitoring Checklist accepted for In Field Protection, is the same as the Monitoring Checklist used for Protection Officer. The checklist will indicate if In Field Protection has been monitored
• First time applied:
  • QR - Certificate of Achievement In Field Protection - accepted from 10/10/2019
  • 3.7_CoA_CERT - accepted from 10/10/2019
  • 3.7_CoA_Accell - accepted from 10/10/2019
  • 3.7_CoA_Swetha - accepted from 10/10/2019
•  QR Protection Officer Monitoring - Accepted

Upload requirements

• Issue date = date of completion on Certificate of Achievement
• Expiry date =
  • Set to 12 months from the Date of completion on Certificate of Achievement (when applied first time and then...)
  • Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events. 
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and the person advised to seek advice from railsafetyworker@qr.com.au

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained.
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO Protection Officer
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO Protection Officer and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage.                         

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events.
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Accepted evidence 

• No example provided.

Competency requirements

• The PO1 Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency, 3-6, 6-12 and 12 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO1 Protection Officer
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO1 Protection Officer and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

• The monitoring checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The monitoring checklist will indicate what stage of development you have attained.
• To be considered for a mentor role, the person must have a minimum level of experience in the equivalent PO Role. This determination will be made by the assessor when assessing the mentor job role. The PO mentor will have passed the 1st time qualified competencies and therefore may progress immediately to the monitoring checklist.
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO1
• Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO1 and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency, 3-6 month monitoring and 6-12 month monitoring and 12 month monitoring - 1st time qualified competencies for this competency to be accepted

• Ongoing Annual upload of evidence (12 month monitoring event)
• For the ongoing annual upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 12 month log if (on page 3) the tick box for PO1 'Next monitoring due in 12 months' is ticked.
• Set to 36 months from the Date of Completion on Certificate of Achievement or no more than 12 months from expiry date of previous 12 month monitoring events.

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO1 Protection Officer
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO1 Protection Officer and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

• The monitoring checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The monitoring checklist will indicate what stage of development you have attained.
• To be considered for a mentor role, the person must have a minimum level of experience in the equivalent PO Role. This determination will be made by the assessor when assessing the mentor job role. The PO mentor will have passed the 1st time qualified competencies and therefore may progress immediately to the monitoring checklist.
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO2 TOA
• Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2TOA and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency, 3-6 month monitoring and 6-12 month monitoring and 12 month monitoring - 1st time qualified competencies for this competency to be accepted

• Ongoing Annual upload of evidence (12 month monitoring event)
• For the ongoing annual upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 12 month log if (on page 3) the tick box for PO2-TOA 'Next monitoring due in 12 months' is ticked.
• Set to 36 months from the Date of Completion on Certificate of Achievement or no more than 12 months from expiry date of previous 12 month monitoring events.

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• To be considered for a mentor role, the person must have a minimum level of experience in the equivalent PO Role. This determination will be made by the assessor when assessing the mentor job role. The PO mentor will have passed the 1st time qualified competencies and therefore may progress immediately to the monitoring checklist.
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO2 TWA
• Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2 TWA and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.

• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage

Worker must hold 0-3 month utilisation competency, 3-6 month monitoring and 6-12 month monitoring and 12 month monitoring - 1st time qualified competencies for this competency to be accepted

• Ongoing Annual upload of evidence (12 month monitoring event)
• For the ongoing annual upload against this qualification, the QR Monitoring Checklist Protection Officer is required to be uploaded - You will know this is a 12 month log if (on page 3) the tick box for PO2-TWA 'Next monitoring due in 12 months' is ticked.
• Set to 36 months from the Date of Completion on Certificate of Achievement or no more than 12 months from expiry date of previous 12 month monitoring events.

For the Monitoring Checklist to be accepted, it will need to meet the following:

• Protection Officer Name
• Card No. and Valid until date shown for the qualification PO2 Track Work Authority
• Please note that in Section 2 not all boxes need to be ticked
• Identify monitoring outcome for PO2 Track Work Authority and set expiry date
• Confirm supervisor name has signed, dated and ticked yes
• Confirm Protection Officer confirmation has been signed, dated and ticked yes

NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

• The PO2 TWA Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency, 3-6, 6-12 and 12 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name- Card No. and Valid until date shown for the qualification PO2 Track Work Authority
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2 Track Work Authority and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• NOTE: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

• The PO2 TOA Trainer qualification specifically covers Queensland Rail's training delivery requirements.
• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency, 3-6, 6-12 and 12 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification PO2 Track Occupancy Authority
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for PO2 Track Occupancy Authority and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

• The Monitoring Checklist is Queensland Rail internal document used to monitor continuous competency of people with this role
• The Monitoring Checklist accepted for Rail Track Signals, is the same as the Monitoring Checklist used for Protection Officer. The checklist will indicate if Rail Track Signals has been monitored
• First time applied:
  • QR - Certificate of Achievement Rail Track Signals - accepted
  • 3.5_CoA_CERT - accepted from 10/10/2019
  • 3.5_CoA_Accell - accepted from 10/10/2019
  • 3.5_CoA_Swetha - accepted from 10/10/2019
•  QR Protection Officer Monitoring - Accepted

Upload requirements

• Issue date = date of completion on Certificate of Achievement
• Expiry date =
  • Set to 12 months from the Date of completion on Certificate of Achievement (when applied first time and then...)
  • Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events. 
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and the person advised to seek advice from railsafetyworker@qr.com.au

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained.
• To be considered for a mentor role, the person must have a minimum level of experience in the equivalent PO Role. This determination will be made by the assessor when assessing the mentor job role. The PO mentor will have passed the 1st time qualified competencies and therefore may progress immediately to the monitoring checklist.
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification RCPO Protection Officer
• Please notethat in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for RCPO and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.

Competency requirements

• The Monitoring Checklist is a Queensland Rail internal document used to monitor continuous competency of people with this role.
• The Monitoring Checklist will indicate what stage of development you have attained
• The stages include - Initial utilisation (set with 3 month expiry) used to initiate the first 3 month stage - 3 month stage (set with 3 month expiry) - 6 month stage (set with 6 month expiry) - 12 month stage (set with 12 month expiry) this stage is set for the ongoing monitoring post the first 12 month stage
• Worker must hold 0-3 month utilisation competency, 3-6, 6-12 and 12 month monitoring competencies for this competency to be accepted
• For the Monitoring Checklist to be accepted, it will need to meet the following:
  • Protection Officer Name
  • Card No. and Valid until date shown for the qualification Rail Corridor Protection Officer (RCPO)
  • Please note that in Section 2 not all boxes need to be ticked
  • Identify monitoring outcome for Rail Corridor Protection Officer (RCPO) and set expiry date
  • Confirm supervisor name has signed, dated and ticked yes
  • Confirm Protection Officer confirmation has been signed, dated and ticked yes
• NOTE: if the completion of any monitoring event falls outside of the expiry date of the previous event, the evidence is to be rejected and person advised to seek advice from railsafetyworker@qr.com.au
• Note: Alternative Pathway If the PO Trainer holds the equivalent PO Role and has passed the 1st time qualified competencies, this PO Trainer may progress immediately to Annual Monitoring. A valid Annual Monitoring Checklist may be used as evidence, the expiry date to be set in line with the expiry on the checklist. This may be for a period of less than 12 months, this will bring the PO Trainer Role competency in line with the PO Role competency.

Upload requirements

• Issue Date = Date of Completion on Certificate of Achievement
• Expiry Date = Set to no more than 12 months from expiry date of previous 12 month/annual monitoring events.

• No example provided.