Certificate III.Air-conditioning and Refrigeration (42301)



Competency requirements

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW

Accepted evidence
Not accepted examplesNot accepted evidence
  • No example provided.


Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000080073

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.AUR30308 Automotive Electrical (24973)


Competency requirements

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000080074

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.AUR30405 Automotive Mechanical Technology (45373)


Competency requirements

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000080075

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.Certificate III in Plumbing (32022)


Competency requirements

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000080076

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.Certificate III Mechanical or Equivalent (26448)


Competency requirements

  • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
  • A qualification issued by a Register Training Organisation (RTO)
  • The qualification must be a Certificate III
  • Any RTO with this on scope can issue the qualification. The unit of competency must:
    • Identify the RTO by its national provider number
    • Shows the Nationally Recognised Training (NRT) logo

Upload requirements

  • Issue Date = Date of completion shown on certificate
  • No expiry date is required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079919

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.CPC30211 – Carpentry (with Formwork competencies) (68066)


Competency requirements

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Where the qualification CPC30211 Certificate III in Carpentry is used as evidence, you must also provide evidence of completing the applicable units of competency:
    • CPCCCA3018A - Construct, erect and dismantle formwork for stairs and ramps
    • CPCCCA3019A - Erect and dismantle formwork to suspended slabs, columns, beams and walls
    • CPCCCA3020A - Erect and dismantle jump form formwork
    • CPCCCA3021A - Erect and dismantle slip form formwork

Upload requirements

  • Please upload your qualification.
  • Issue Date = Date of completion
  • Expiry Date = No expiry is required
Accepted evidence
  • No example provided.
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079748

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.Formwork / Falsework (40562)


Competency requirements

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
  • No example provided.

Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079809

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.Formwork / Falsework (GROUP) (40561 or 40562 or 67365)


Competency requirements

  • Applicants name to be shown on documentation
  • Applicants name must match (However shortened versions such as 'Chris' for Christopher can be accepted)
  • Evidence for this competency requires the completion of a certificate III in Formwork / Falsework.
  • Where the qualification CPC30211 Certificate III in Carpentry is used as evidence, you must also provide evidence of completing the applicable units of competency:
    • CPCCCA3018A - Construct, erect and dismantle formwork for stairs and ramps
    • CPCCCA3019A - Erect and dismantle formwork to suspended slabs, columns, beams and walls
    • CPCCCA3020A - Erect and dismantle jump form formwork
    • CPCCCA3021A - Erect and dismantle slip form formwork


Upload requirements

  • Please upload your qualification.
  • Issue Date = Date of completion
  • Expiry Date = No expiry is required
Accepted evidence
  • No example provided.
Not accepted evidence
  • No example provided.

Business Rule Link

https://businessrules.riw.net.au/support/solutions/articles/51000075642


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.MEM30205 Certificate III Engineering - Mechanical (23860)


Competency requirements

  • Name on documentation to match the person registered (Shortened version of name is accepted EG. Chris for Christopher)
  • A qualification issued by a Register Training Organisation (RTO)
  • The qualification must be a Certificate III.
  • The qualification must show: MEM30205 Certificate III in Engineering - Mechanical
  • Any RTO with this on scope can issue the qualification. The unit of competency must:
    • Identify the RTO by its national provider number
    • Shows the Nationally Recognised Training (NRT) logo

Upload requirements

  • Issue Date = Date of completion shown on certificate
  • No expiry date is required
Accepted evidence
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079918

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.MEM30298 Engineering - Mechanical Trade (71351)


Competency requirements 

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements 

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
  • No example provided.

Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079810

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.MEM30305 - Engineering Fabrication (24972)


Competency requirements 

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements 

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
  • No example provided.

Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079807

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.MEM30398 - Engineering Fabrication (68624)


Competency requirements 

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements 

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
  • No example provided.
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079811

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate III.Plumber - Apprenticeship Certificate of Completion (68184)


Competency requirements 

Evidence for this competency is issued by a State governing body.

Upload requirements

  • Both sides (Front and Back) of card / licence required
  • Issue Date = Only enter if there is a date of completion shown on evidence
  • Expiry Date = As listed on the card.
Accepted evidence
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079923

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Certificate IV.CPP40811 Access Consulting (59516)


Competency requirements 

When certificate is uploaded:

  • Australian** Recognised Training Institution name must be displayed on document
  • Applicant name on certificate to match the name in the system
  • Completion date or issue date must be displayed on the certificate
  • Course title to be listed on certificate to match the nominated coding and title within RIW
  • Document / Certificate / Number to be shown
  • No expiry

When trade licence is uploaded:

  • Contractor License and Supervisor License can be accepted as evidence of Certificate III in Air-conditioning and Refrigeration providing it has the persons name, date and license number from NSW fair trading (or other relevant Australian State Government Authority)

**Internationally issued trade certificates / Licences cannot be accepted regardless of country of issue / standards referenced etc. - Automatic recognition has been suspended for a number of years now. If the contractor has completed the trade course overseas, they will be required to either:

  • Attend an Australian RTO who will competency map their certificate and align it to an Australian equivalent (Note: The RTO may deem as part of this process that there may be some additional training that is required).
  • The applicant can apply to have their licence recognised and if approved by Fair Trading they will be issued an Australian Licence (though there is normally gap training as Australia has more or different requirements within the trades)

Upload requirements 

When certificate is uploaded:

  • Record the Issue date within RIW:
  • Completion date - if listed on certificate (this completion date is always used when displayed)
  • Issue date - If only an issue date is listed please enter this as the issue date

When trade licence is uploaded:

  • Expiry date to be recorded within RIW
Accepted evidence
  • No example provided.
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079808

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Licence.Building Authority Plumbing Registration Card (68189)


Competency requirements 

  • Evidence for this competency is a recognised building industry registration card

Upload requirements

  • Both sides (Front and Back) of card / licence required
  • Issue Date = Only enter if there is a date of completion shown on evidence
  • Expiry Date = As listed on the card.
Accepted evidence
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079920

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Licence.Fair Trading - Supervisor Licence - Plumber


Competency requirements 

Evidence for this competency is issued by a State governing body.

Upload requirements

  • Both sides (Front and Back) of card / licence required
  • Issue Date = Only enter if there is a date of completion shown on evidence
  • Expiry Date = As listed on the card.
Accepted evidence
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079922

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Licence.Fair Trading – Contractor Licence - Plumber (68185)


Competency requirements 

Evidence for this competency is issued by a State governing body.

Upload requirements

  • Both sides (Front and Back) of card / licence required
  • Issue Date = Only enter if there is a date of completion shown on evidence
  • Expiry Date = As listed on the card.
Accepted evidence
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079921

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Licence.Tradespersons Licence NSW - Motor Mechanic (67910)


Competency requirements

  • Applicants name to be shown on document and this should match cardholders registered name
  • Tradesperson Licence should be uploaded
  • Motor Mechanic should be shown on the Licence
  • Licence must be issued by Government appointed authority (EG NSW Fair Trading)
  • Black and white or colour copy of document accepted

Upload requirements

  • Issue Date = Does not need to be recorded in RIW
  • Expiry Date = Should be recorded in RIW as displayed on the licence
Accepted evidence
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000080002

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Qualified.Plumbing Trade (68188)


Competency requirements

  • Evidence for this competency can be a qualification issued by a Registered Training Organisation (RTO) or governing body.
  • The qualification must be a Certificate III.The qualification must show reference to Plumbing.


Upload requirements

  • Please upload your qualification
  • Statements of Attainment do not require an expiry date
  • Licences and cards require an expiry date, which is shown on the licence of card.
Accepted evidence
  • No example provided.
Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000079749

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.