Statement of Attendance.SMIC Attendance / Transcript (BSBDIV301) (86582)


Competency requirements

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

Upload requirements 

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
  • No example provided.

Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078655

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (BSBMGT401A) (86580)


Competency requirements

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
  • No example provided.

Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078656

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (BSBRSK401) (86581)


Competency requirements

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
  • No example provided.

Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078657

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCBC4002A) (82725)


Competency requirements

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078723

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCBC4012B) (82727)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted, e.g., 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078724

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCCM2001A) (82729)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted, e.g. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078725

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE3016A) (82731)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted, e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078726

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE3017A) (82733)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted, e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078727

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE3018A) (82735)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078728

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE3019A) (82737)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted, e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078729

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE3020A) (82739)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted, e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078730

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE3022A) (82741)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078731

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE4001A) (82743)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078732

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE4002A) (82745)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078733

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE4003A) (82747)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078734

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (CPCCDE4004A) (82749)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078735

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (MEM16006A) (82261)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078737



Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (MEM18002B) (82260)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078738

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (MSMWHS200) (82262)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078739

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (MSMWHS201) (82263)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078740

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (RIICOM201D) (82264)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

SMIC Attendance/Transcript (RIICOM201D)

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a TAFE issued participant results record is uploaded:

  • Expiry date = Is NOT required

When a Sydney Metro SMIC Civil Construction Worker Experience – Evidence Guide  

  • Complete form in full (no exceptions) 
  • Two signature boxes completed 
  • Date completed 
Upload requirements

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

 

When a Tafe issued participant results record is uploaded:

  •  Expiry date = Is NOT required
Accepted evidence
  • No example provided.

Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078741

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (RIIRIS201D) (82265)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.


    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

SMIC Attendance/Transcript (RIIRIS201D)

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a TAFE issued participant results record is uploaded:

  • Expiry date = Is NOT required

When a Sydney Metro SMIC Civil Construction Worker Experience – Evidence Guide

  • Complete form in full (no exceptions) 
  • Two signature boxes completed 
  • Date completed

Upload requirements 

  • When a Nationally recognised statement of attainment or transcript is uploaded:
    • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information
  • When a Tafe issued participant results record is uploaded:

    • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078742

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (RIISAM202D) (82266)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

SMIC Attendance/Transcript (RIISAM202D)

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a TAFE issued participant results record is uploaded:

  • Expiry date = Is NOT required

When a Sydney Metro SMIC Civil Construction Worker Experience – Evidence Guide 

  • Complete form in full (no exceptions) 
  • Two signature boxes completed 
  • Date completed 


Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078743

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (RIISAM203D) (82267)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

SMIC Attendance/Transcript (RIISAM203D)

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a TAFE issued participant results record is uploaded:

  • Expiry date = Is NOT required

When a Sydney Metro SMIC Civil Construction Worker Experience – Evidence Guide

  • Complete form in full (no exceptions) 
  • Two signature boxes completed 
  • Date completed 


Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078744

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (RIISAM204D) (82268)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

When a Sydney Metro SMIC Civil Construction Worker Experience – Evidence Guide 

  • Complete form in full (no exceptions) 
  • Two signature boxes completed 
  • Date completed 
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078745

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (RIIUND310D) (82269)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078746

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (RIIWHS201D) (82270)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

SMIC Attendance/Transcript (RIIWHS201D)

When a Nationally recognised statement of attainment or transcript is uploaded:

  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a TAFE issued participant results record is uploaded:

  • Expiry date = Is NOT required

When a Sydney Metro SMIC Civil Construction Worker Experience – Evidence Guide 

  • Complete form in full (no exceptions) 
  • Two signature boxes completed 
  • Date completed 
Upload requirements
  • When a Nationally recognised statement of attainment or transcript is uploaded:
    • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information
  • When a Tafe issued participant results record is uploaded:

    • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078747

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (TLIC3037) (82271)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078748

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (TLIE1003) (82273)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078749

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (TLIE2007) (82274)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078750

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (TLIE2029) (82275)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a Tafe issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078751

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (TLIF0078) (82272)



Competency requirements

When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: 
  • Please CLICK HERE to be redirected to the national RIW statement of attainment business rule

When a TAFE issued participant results record is uploaded:

  • Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form – USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page

 

When a Sydney Metro issued SMIC Interim Certificate is uploaded:

  • Applicant Name on sheet to match the name in the system (shortened versions accepted eg. ‘Chris’ accepted for Christopher)
  • Certificate will display 'SMIC Interim Certificate' and relevant Sydney Metro SMIC stream

Upload requirements


When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

 

When a TAFE issued participant results record is uploaded:

  • Expiry date = Is NOT required


When a Sydney Metro issued SMIC Interim Certificate is uploaded:

  • Expiry date = as displayed on the certificate.
Accepted evidence

Not accepted evidence
  • No example provided.
Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000123827

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

Statement of Attendance.SMIC Attendance / Transcript (TLIF2010) (82127)


Competency requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Grouped competency selection should be the national statement of attainment unit of competency rather than the SMIC specific competency: Please CLICK HERE to be redirected to the national RIW statement of attainment business rule
  • If the unit code letter version e.g., (A, B, C, D, E etc.) differs. Superseded units are acceptable for the competency. Please refer to training.gov.au to confirm that superseded units are equivalent to the unit specified in the competency name. 

    As per the Rail Industry Worker national business rules for a Statement of Attainment.

    When a Tafe issued participant results record is uploaded:
  • Name on sheet to match the name in the system (shortened versions accepted e.g.. 'Chris' accepted for Christopher)
  • Specific unit of competency must be shown on the sheet that aligns to this competency code and title
  • Course information in the first section of the form completed in full (minimum of one trainer/assessor name to be stated)
  • Worker details in second section of the form - USI number, Employer, Signature and if they have been deemed Competent (anyone deemed Not Yet Competent should not be approved)
  • Last section of form to have trainer name and signature at the bottom of the page
Upload requirements
When a Nationally recognised statement of attainment or transcript is uploaded:
  • Refer to national business rule for statement of attainments and transcripts for issue and expiry date information

When a Tafe issued participant results record is uploaded:

  • Expiry date = Is NOT required
Accepted evidence
Not accepted evidence
  • No example provided.

Business Rule Link
https://businessrules.riw.net.au/support/solutions/articles/51000078753

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.